Manly Scarf

Manly Scarf
Manly Scarf

Hubby modeling the Manly Scarf.
Hubby modeling the Manly Scarf.

Nephew trying on his Holiday gift.
Nephew wearing his Holiday gift.

Despite its name, I worried this scarf wasn’t manly enough. Maybe it was the yarn or maybe it was the stitch, but I wondered, “Does this scarf look masculine?” I wasn’t convinced until Hubby tried it on. Yay! It looked great, and was ready to be wrapped as a gift for my nephew.

Happy knitting, hon!

Manly Scarf

Stitches are cast on for the entire length of the scarf, which is knit from side to side on a circular needle. Tip: Place stitch markers every 20 stitches (or however many stitches you like). This makes keeping track of the total stitches much easier. 

Yarn: The yarn used in the pattern on Ravelry was Manos del Uruguay Handspun Semi Solids, skein of 100g: 138 yards/126 m

4-5 skeins of main color

1-2 skeins of contrast color

Needles:  One US 10 (6mm) circular needle (as long as possible). Change needle size if necessary to obtain gauge.

Notions:  Stitch markers. One yarn needle for weaving in ends.

Gauge: 

In stockinette stitch, 10 cm/4 inches = 14-18 stitches

In pattern stitch, 10 cm/ 4 inches = 10-12 stitches

Pattern Stitch

Row 1:  Knit all stitches.

Row 2:  Knit 2 together to end.

Row 3:  Knit into front and back of every stitch.

Row 4:  Purl all stitches.

Directions:

Cast on 250 stitches. Work in pattern stitch until scarf has desired width. The stripe pattern is 3 pattern repeats in the main color, then one in the contrast color like this:

MC x 3

CC

MC x 3

CC

MC x 3

Cast off.

Notes:  Click the link under Source to see the original pattern, where the author of the pattern explains how to substitute the yarn. I used a different yarn than the one shown on Ravelry and since–gasp–I detest making swatches, I winged it, casting 250 sts and knitting to a width and length I thought looked good on a guy. (I know, very scientific!)

Source: Ravelry, pattern by Johanna K Sarten

 

Warm and Cozy Knit Infinity Scarf

Honey Cowl.
Honey Cowl.

img_1270

img_1272

I made this Infinity Scarf, called a “Honey Cowl,” last year and wanted to knit it again. This time, I followed the pattern for the shorter version. The Simplicity yarn color “49 Shades of Gray” has a hint of mint green and is a Merino wool blend. It was a pleasure to work with.

Happy knitting, hon.

Infinity Scarf, Honeycomb Cowl

Finished Measurements:  22 inches in length by 12 inches in width for short version (44 inches in length by 12 inches in width for longer version)

Yarn:  55% Merino Superwash merino, 28% Acrylic, 17% Nylon, 140 yards (128 meters), 2 (4) skeins (double check amount of yarn needed depending on type of yarn and yardage.)

Needles:  One US 8 (5.0mm) 26″ (66 cm) circular needle for short version or One US 8 (5.0 mm) 36″ (91 cm) circular needle for longer version.  Change needle size if necessary to obtain gauge.

Notions:  One stitch marker for beginning of round. One yarn needle for weaving in ends.

Gauge:  5 sts = 1 inch (10 cm) in honeycomb pattern.

Notes:  For an in-between size, 1 skein and 160 sts will create a 32 inch long by 8 inch wide cowl.  2 skeins at 160 sts will create a 32 inch long by 16 inch wide cowl.

Pattern Stitch:  Slip Stitch Honeycomb

Note:  When working rounds 2 and 4, slip as if to purl and keep yarn in front)

Round 1:  Knit

Round 2:  *Purl 1, slip 1 wyif* repeat across round

Round 3:  Knit

Round 4:  *Slip 1 wyif, Purl 1* repeat across round

Directions:

Cast on 110 (220) stitches.  Being careful not to twist stitches, place marker and join for working in the round.  Knit 4 rounds.

Repeat the 4 rounds of “Slip Stitch Honeycomb Pattern” above until work measures approximately 11 inches.  Make sure that you have enough yarn left over for the following:  Knit 3 rounds and bind off loosely.

Source:  Ravelry, http://www.ravelry.com/patterns/library/honey-cowl/people

 

Easy Two Stitch Infinity Scarf

93 yards
70 yards

IMG_9069

 

 

 

 

 

 

 

Two Stitch Infinity Scarf
Two Stitch Infinity Scarf

Sew Handy

I learned how to needlepoint and embroider in Girl Scouts when Girl Scout badges were earned by practicing “traditional girl activities.”  My mom taught me how to use a sewing machine and, in fifth grade, I learned how to knit. I’m not sorry about learning Victorian-age  skills, though, because they provide instant stress relief and a sense of accomplishment. Knitting, especially, has taught me…

It’s okay to make mistakes.

Miss a stitch? Rip out rows. Yarn’s knotted up? Untangle it. Don’t care for a pattern? Try a different one. Sometimes, I re-start a project several times and–guess what–I don’t yell non G-rated words (click here if you want to know when I do yell non G-rated words.)

Easy Two-Stitch Infinity Scarf Directions

  1. Using a size 10 1/2 inch circular needle, cast on 60 stitches. Place a stitch counter to mark the end of the round. Gauge doesn’t matter.
  2. K2 P2 for 4 rows.
  3. Knit in the round until yarn is almost finished, but leaving enough to rib until the end.
  4. K2 P2 for 4 rows.
  5. Bind off loosely, Weave in loose ends.

Finished scarf–mine measures 9 inches wide.

Show -n- Tell (more projects)

I recently finished needlepoints for my niece and nephew. Here they are made into pillows.

IMG_5849IMG_5854

 

 

 

Infinity Scarf, Honey Cowl

Honeycomb patterned cowl.
Honeycomb patterned cowl.

Beautiful yarn.
Beautiful yarn.

IMG_4935

 

 

 

 

 

If you want something warm for winter or a pretty gift to give, this was an easy, enjoyable pattern. I made this as a gift for my sister-in-law (shout out to Kim).

Infinity Scarf, Honeycomb Cowl

Finished Measurements:  22 inches in length by 12 inches in width for short version (44 inches in length by 12 inches in width for longer version)

Yarn:  100% superwash merino wool, 225 yards (206 meters), 1 (2) skeins

Needles:  One US 8 (5.0mm) 26″ (66 cm) circular needle for short version or One US 8 (5.0 mm) 36″ (91 cm) circular needle for longer version.  Change needle size if necessary to obtain gauge.

Notions:  One stitch marker for beginning of round. One yarn needle for weaving in ends.

Gauge:  5 sts = 1 inch (10 cm) in honeycomb pattern.

Notes:  For an in-between size, 1 skein and 160 sts will create a 32 inch long by 8 inch wide cowl.  2 skeins at 160 sts will create a 32 inch long by 16 inch wide cowl.

Pattern Stitch:  Slip Stitch Honeycomb

Note:  When working rounds 2 and 4, slip as if to purl and keep yarn in front)

Round 1:  Knit

Round 2:  *Purl 1, slip 1 wyif* repeat across round

Round 3:  Knit.

Round 4:  *Slip 1 wyif, Purl 1* repeat across round

Directions:

Cast on 110 (220) stitches.  Being careful not to twist stitches, place marker and join for working in the round.  Knit 4 rounds.

Repeat the 4 rounds of “Slip Stitch Honeycomb Pattern” above until work measures approximately 11 inches.  Make sure that you have enough yarn left over for the following:  Knit 3 rounds and bind off loosely.

Source:

Ravelry, http://www.ravelry.com/patterns/library/honey-cowl/people

 

Infinity Scarf

Here I am wearing my Infinity Scarf.  So comfy!
Here I am wearing my Infinity Scarf. So comfy!

Infinity Scarf laid out.
Infinity Scarf laid out.

Knit and purl side are visible.
Knit and purl sides are visible.

Hon, I found only one skein of this gorgeous, hand painted Schaefer yarn/ Elaine, color Nellie Bly (99% Merino Wool, 1% Nylon), and the idea of an Infinity Scarf was born.  I had knit a bunch of hats and mittens for my kids (I’m still working on another hat) and decided I could use a little warmth this winter.

I started knitting the scarf working in seed stitch (K1, P1) but then the slubs of the yarn were hidden.  So, I unraveled the seed stitches and started over.  I knit every round instead.  Both the knit side and purl side are visible when the scarf is worn.  This is an easy way to show off beautiful color and texture.

Pattern:

Using size 11 circular needles (or whatever size the gauge of your yarn calls for), cast on 131 stitches.

Join in the round.

Knit each round until scarf measures about 15 inches.  In this case, I used up the ball of yarn.

Bind off and weave in the ends.

Blocking and Setting the Color:

Pour 1/4 cup of white vinegar in a sink with filled with cold water.

Let the scarf sit for a bit.

Rinse the scarf out.

Lay flat to dry, pinning the edges to a towel with straight pins.  Blocking this way flattenens the edges somewhat.  I wanted some curl since the edges aren’t ribbed, but at the same time, they were curling too much.

When only slightly damp, I fluffed the scarf in my dryer on “Air Only” for about 15 minutes.

With the yarn softened and color set, the scarf was ready to wear.